Electroless Nickel

• Just one product to order, ship, stock
• Savings on time, labor, energy, and lab work, due to the ease of using a single component
• The option of using a single replenishment pump for the single component rather than manual pouring of multiple components
• Higher quality and consistency as all components in the bath stay in balance
• Long bath life thanks to consistent chemistry
• Full or partial self-pH maintaining solutions RoHS, ELV and similar regulations compliant
• Meet or exceed MIL-C-26074-D, AMS 2404 C, and other specifications
• Environmental benefits from a lower nickel concentration drag out and waste at end of the bath life
• Ability to use One-Plate® baths for composite coating with PTFE, diamond, silicon carbide, boron nitride and other particles
• PatentedTypical Density Properties:

ONE PLATE 3001 – Low Phos

• Phosphorous Content: 3-5% by Weight
• Hardness as plated: 700 VHN100
• Heat Treated @ 400°C for 1 Hr: 1000 VHN100
• Salt Spray (ASTM-B-117): 90-100 Hrs.
• Stress: Compressive
• Magnetic Properties: Magnetic
• Deposition:  0.6-0.8 mil Per Hr.

ONE PLATE 1001 – Mid Phos

Typical Density Properties:
‍
• Phosphorous Content: 6-9% by Weight  
• Hardness as plated:  550 VHN100  
• Heat Treated @ 400°C for 1 Hr:  990 VHN100  
• Salt Spray (ASTM-B-117): 100-120 Hrs.  
• Stress: Slightly Tensile  
• Magnetic Properties:  Slightly Magnetic  
• Deposition: 0.7 – 0.9 mil Per Hr.

ONE PLATE 2001 – High Phos

Typical Density Properties:  

Phosphorous Content : 10-13% by Weight  
Hardness as plated:  500 VHN100
 Heat Treated @ 400°C for 1 Hr:  950 VHN100  
Salt Spray (ASTM-B-117): 1000 Hrs.  
Stress: Slightly Compressive  
Magnetic Properties:  Non-Magnetic  
Deposition: 0.3 – 0.5 mil Per Hr.